Command Reference Guide

184 CHAPTER 6: IP SERVICES COMMANDS
The following command displays configuration and status information for
each VLAN on which the DHCP server is configured:
WX-1200# display dhcp-server
Interface: 0 (Direct AP)
Status: UP
Address Range: 10.0.0.1-10.0.0.253
Interface: default(1)
Status: UP
Address Range: 10.10.20.2-10.10.20.254
DHCP Clients:
Hardware Address: 00:01:02:03:04:05
State: BOUND
Lease Allocation: 43200 seconds
Lease Remaining: 12345 seconds
IP Address: 10.10.20.2
Subnet Mask: 255.255.255.0
Default Gateway: 10.10.20.1
DNS Servers: 10.10.20.4 10.10.20.5
DNS Domain Name: mycorp.com
Table 37 and Table 38 describe the fields in these displays.
Table 37 Output for display dhcp-server
Field Description
VLAN VLAN number.
Name VLAN name.
Address IP address leased by the server.
MAC Address MAC address of the device that holds the lease for the
address.
Lease Remaining Number of seconds remaining before the address lease
expires.