Command Reference Guide

display dhcp-server 183
See Also
 set interface dhcp-client on page 144
display dhcp-server Displays MSS DHCP server information.
Syntax — display dhcp-server [interface vlan-id] [verbose]
 interface vlan-id — Displays the IP addresses leased by the
specified VLAN.
 verbose — Displays configuration and status information for the MSS
DHCP server.
Defaults — None.
Access — All.
History —Introduced in MSS Version 4.0.
Examples — The following command displays the addresses leased by
the MSS DHCP server:
WX-1200# display dhcp-server
VLAN Name Address MAC Lease Remaining (sec)
---- -------------- --------------- ----------------- --------------------
1 default 10.10.20.2 00:01:02:03:04:05 12345
1 default 10.10.20.3 00:01:03:04:06:07 2103
2 red-vlan 192.168.1.5 00:01:03:04:06:08 102
2 red-vlan 192.168.1.7 00:01:03:04:06:09 16789
Subnet Mask Network mask of the IP address received from the
DHCP server.
Default Gateway Default gateway IP address received from the DHCP
server. If the address is 0.0.0.0, the server did not
provide an address.
DHCP Server IP address of the DHCP server.
DNS Servers DNS server IP address(es) received from the DHCP
server.
DNS Domain Name Default DNS domain name received from the DHCP
server.
Table 36 Output for display dhcp-client (continued)
Field Description