Command Reference Guide

180 CHAPTER 6: IP SERVICES COMMANDS

set timedate Sets the time of day and date on the wireless LAN switch.

Syntax —

set timedate {date mmm dd yyyy [time hh:mm:ss]}

 date mmm dd yyyy — System date:

 mmm — month

 dd — day

 yyyy — year

 time hh:mm:ss — System time, in hours, minutes, and seconds.

Defaults — None.

Access — Enabled.

History —Introduced in MSS Version 3.0.

Usage — The day of week is automatically calculated from the day you set.

The time displayed by the CLI after you type the command might be slightly

later than the time you enter due to the interval between when you press

Enter and when the CLI reads and displays the new time and date.

Configure summertime before you set the time and date. Otherwise,

summertime’s adjustment of the time will make the time incorrect, if the

date is within the summertime period.

Examples — The following command sets the date to March 13, 2003

and time to 11:11:12:

WX4400# set timedate date feb 29 2004 time 23:58:00

Time now is: Sun Feb 29 2004, 23:58:02 PST