Command Reference Guide

set summertime 177
WX-1200# set snmp usm securesnmpmgr1 snmp-engine-id
ip 192.168.40.2 auth-type sha auth-pass-phrase myauthpword
encrypt-type 3des encrypt-pass-phrase mycryptpword
success: change accepted.
See Also
 clear snmp usm on page 122
 set ip snmp server on page 152
 set snmp community on page 160
 set snmp notify target on page 162
 set snmp profile on page 167
 set snmp protocol on page 172
 set snmp security on page 173
 display snmp usm on page 193
set summertime Offsets the real-time clock of a wireless LAN switch by +1 hour and
returns it to standard time for daylight savings time or a similar
summertime period that you set.
Syntax —
set summertime summer-name [start week weekday
month hour min end week weekday month hour min]
 summer-name — Name of up to 32 alphanumeric characters that
describes the summertime offset. You can use a standard name or any
name you like.
 start — Start of the time change period.
 week — Week of the month to start or end the time change. Valid
values are first, second, third, fourth, or last.
 weekday — Day of the week to start or end the time change. Valid
values are sun, mon, tue, wed, thu, fri, and sat.
 month — Month of the year to start or end the time change. Valid
values are jan, feb, mar, apr, may, jun, jul, aug, sep, oct, nov, and
dec.
 hour — Hour to start or end the time change — a value between 0
and 23 on the 24-hour clock.