Command Reference Guide

170 CHAPTER 6: IP SERVICES COMMANDS
 all — Sends or drops all notifications.
Defaults — A default notification profile (named default) is already
configured in MSS. All notifications in the default profile are dropped by
default.
Access — Enabled.
History —Introduced in MSS Version 4.0.
Examples — The following command changes the action in the default
notification profile from drop to send for all notification types:
WX-1200# set snmp notify profile default send all
success: change accepted.
The following commands create notification profile snmpprof_rfdetect,
and change the action to send for all RF detection notification types:
WX-1200# set snmp notify profile snmpprof_rfdetect send
RFDetectAdhocUserTraps
success: change accepted.
WX-1200# set snmp notify profile snmpprof_rfdetect send
RFDetectClientViaRogueWiredAPTraps
success: change accepted.
WX-1200# set snmp notify profile snmpprof_rfdetect send
RFDetectDoSTraps
success: change accepted.
WX-1200# set snmp notify profile snmpprof_rfdetect send
RFDetectAdhocUserTraps
success: change accepted.
WX-1200# set snmp notify profile snmpprof_rfdetect send
RFDetectInterferingRogueAPTraps
success: change accepted.
WX-1200# set snmp notify profile snmpprof_rfdetect send
RFDetectInterferingRogueDisappearTraps
success: change accepted.
RFDetectUnAuthorizedOuiTraps Generated when a wireless device that is
not on the list of permitted vendors is
detected.
RFDetectUnAuthorizedSsidTraps Generated when an SSID that is not on the
permitted SSID list is detected.
Table 35 SNMP notification types (continued)