Command Reference Guide

set snmp profile 167
set snmp profile Configures an SNMP notification profile. A notification profile is a named
list of all the notification types that can be generated by a switch, and for
each notification type, the action to take (drop or send) when an event
occurs.
You can configure up to 10 notification profiles.
Syntax —
set snmp profile {default | profile-name} {drop | send}
{
notification-type | all}
 default | profile-name — Name of the notification profile you are
creating or modifying. The
profile-name can be up to 32
alphanumeric characters long, with no spaces.
To modify the default notification profile, specify
default.
 drop | send —Specifies the action that the SNMP engine takes with
regard to the notifications you specify with notification-type or all.
 notification-type — Any of the items in Table 35.
Table 35 SNMP notification types
AuthenTraps Generated when the WX switch’s SNMP
engine receives a bad community string.
AutoTuneRadioChannelChangeTraps Generated when the RF Auto-Tuning
feature changes the channel on a radio.
AutoTuneRadioPowerChangeTraps Generated when the RF Auto-Tuning
feature changes the power setting on a
radio.
ClientAssociationFailureTraps Generated when a client’s attempt to
associate with a radio fails.
ClientAuthorizationSuccessTraps Generated when a client is successfully
authorized.
ClientAuthenticationFailureTraps Generated when authentication fails for a
client.
ClientAuthorizationFailureTraps Generated when authorization fails for a
client.
ClientClearedTraps Generated when a client’s session is
cleared.
ClientDeAssociationTraps Generated when a client is dissociated from
a radio.