Command Reference Guide

set ip telnet server 157

See Also

 clear ip telnet on page 119

 display ip https on page 129

 display ip telnet on page 133

 set ip https server on page 150

 set ip telnet server on page 157

set ip telnet server Enables the Telnet server on a wireless LAN switch.

CAUTION: If you disable the Telnet server, Telnet access to the WX

switch is also disabled.

Syntax —

set ip telnet server {enable | disable}

 enable — Enables the Telnet server.

 disable — Disables the Telnet server.

Defaults — The Telnet server is disabled by default.

Access — Enabled.

Usage — The maximum number of Telnet sessions supported on a WX

switch is eight. If SSH is also enabled, the WX switch can have up to eight

Telnet or SSH sessions, in any combination, and one console session.

Examples — The following command enables the Telnet server on a WX

switch:

WX4400# set ip telnet server enable

success: change accepted.