Manualshelf

Command Reference Guide

ManualsBrandsHP ManualsSoftwareHP Wireless Switch Manager Software
131132133134135136137138139140
display snmp configuration 137
CounterMeasureStopTraps YES
ClientDot1xFailureTraps YES
Community Access Community Name
---------------- --------------
read-only public
read-write private
Table 34 describes the fields in this display.
See Also
set ip snmp server on page 152
set port trap on page 86
set snmp community on page 160
set snmp profile on page 167
set snmp notify target on page 162
set system contact on page 54
set system location on page 58
set system name on page 58
Table 34 Output of display snmp configuration
Field Description
Snmp agent is State of the SNMP agent on the WX switch:
Enabled
Disabled
System Name String configured by the set system name command.
System location String configured by the set system location command.
System contact String configured by the set system contact command.
System description WX switch model.
Trap Receiver IP address of each trap receiver.
Trap Name SNMP traps supported by MSS.
Enabled State of each trap:
Yes
No
Community Access Type of access for an SNMP community.