Command Reference Guide
display ip telnet 133
display ip telnet Shows information about the Telnet management port.
Syntax —
display ip telnet
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command shows the status and port number
for the Telnet management interface to the WX switch:
WX4400> display ip telnet
Server Status Port
----------------------------------
Enabled 23
Table 32 describes the fields in this display.
See Also
clear ip telnet on page 119
display ip https on page 129
set ip https server on page 150
set ip telnet on page 156
set ip telnet server on page 157
Table 32 Output for display ip telnet
Field Description
Server Status State of the HTTPS server:
Enabled
Disabled
Port TCP port number on which the WX switch listens for Telnet
management traffic.