Command Reference Guide

display arp 125
History — Introduced in MSS Version 3.0.
Examples — To return the WX switch’s real-time clock to UTC, type the
following command:
WX4400# clear timezone
success: change accepted.
See Also
 clear snmp usm on page 122
 set summertime on page 177
 set timedate on page 180
 set timezone on page 181
 display summertime on page 138
 display timedate on page 138
 display timezone on page 139
display arp Shows the ARP table.
Syntax —
display arp [ip-addr]
 ip-addr — IP address.
Defaults — If you do not specify an IP address, the whole ARP table is
displayed.
Usage — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays ARP entries:
WX4400# display arp
ARP aging time: 1200 seconds
Host HW Address VLAN Type State
------------------------------ ----------------- ----- ------- --------
10.5.4.51 00:0b:0e:02:76:f5 1 DYNAMIC RESOLVED
10.5.4.53 00:0b:0e:02:76:f7 1 LOCAL RESOLVED
Table 26 describes the fields in this display.