Command Reference Guide

106 CHAPTER 5: VLAN COMMANDS
display vlan config Shows VLAN information.
Syntax —
display vlan config [vlan-id]
 vlan-id — VLAN name or number. If you do not specify a VLAN,
information for all VLANs is displayed.
Defaults — None.
Access — All.
History —Introduced in MSS Version 3.0.
Examples — The following command displays information for VLAN
burgundy:
WX1200# display vlan config burgundy
Admin VLAN Tunl Port
VLAN Name Status State Affin Port Tag State
---- ---------------- ------ ----- ----- ---------------- ----- -----
2 burgundy Up Up 5
2 none Up
3 none Up
4 none Up
6 none Up
t:10.10.40.4 none Up
Table 24 describes the fields in this display.
Table 24 Output for display vlan config
Field Description
VLAN VLAN number.
Name VLAN name.
Admin Status Administrative status of the VLAN:
 Down — The VLAN is disabled.
 Up — The VLAN is enabled.
VLAN State Link status of the VLAN:
 Down — The VLAN is not connected.
 Up — The VLAN is connected.