CLI Reference Guide

Defining a Mobility Domain 93
2 In the Mobility Domain Name box, type the name for the Mobility
Domain (1 to 16 characters, with no spaces or tabs).
3 In the Seed Member list, select the WX switch that is the seed member.
Only a WX in the Mobility Domain can be specified as a seed member. If
the only value in the list is Not Assigned, you must create a WX switch
and assign it a valid system IP address before completing the wizard.
4 Do one of the following:
 To close the wizard, click Finish.
 To create a WX switch and add it to the Mobility Domain, see
“Adding a WX Switch to the Network Plan” on page 186.