CLI Reference Guide

92 CHAPTER 3: GETTING STARTED
The traffic typically sent between WX switches within a Mobility Domain
uses IP/UDP protocol 17 traffic on port 8817 for both source and
destination. Roaming traffic uses IP protocol 4.
Creating a Mobility
Domain
To create a mobility domain, follow these steps.
1 Access the Mobility Domain wizard by doing one of the following:
 In the main 3WXM window, select Config > Insert > Mobility
Domain.
 In the Equipment section of the Organizer panel, right click and select
Insert > Mobility Domain.
Table 13 Traffic Ports Used for AAA Servers and Management Servers
Protocol Port Function
IP/UDP (17) 1812 RADIUS authentication
(default setting)
IP/UDP (17) 1813 RADIUS accounting (default
setting)
IP/TCP (6) 443 Secure Sockets Layer
protocol (SSL) management
using Web Manager
IP/TCP (6) 8889 SSL management using
3WXM
IP/TCP (6) 23 Telnet management
IP/UDP (17) 161 SNMP get and set operations
IP/UDP (17) 162 SNMP traps
IP/ICMP (1) N/A Several types (for example,
ping)
IP/UDP (17) 123 Network Time Protocol (NTP)
IP/UDP (17) 53 Domain Name Service (DNS)