CLI Reference Guide

86 CHAPTER 3: GETTING STARTED
Closing a Network
Plan
You can close a network plan at any time. If you have unsaved changes,
you are asked whether you want to save the changes. You can save the
changes on the server (the host running the 3WXM service) or locally (the
host on which you are working).
If you elect to save changes locally, the changes are not saved on the
server. In this case, the next time you start 3WXM, the software checks
whether your client still holds the lock for the network plan; if it does,
then the network plan with the locally saved changes is opened in
3WXM.
To close a network plan:
1 In the main 3WXM window, select File > Close or File > Exit.
If the network plan has no unsaved changes, the network plan is closed.
Otherwise, go to the next step.
2 Specify whether you want to save the changes since the network plan
was opened or cancel the close process.
If you choose to save the changes, you are prompted whether you want
to send them to the server or save them locally.
3 Do one of the following:
 Select Send Changes to Server to save the network plan changes on
the host running the 3WXM service.
 Select Save Changes Locally to save the network plan changes on
the local host running the 3WXM client.