CLI Reference Guide

Copying and Pasting Objects 71
Copy and Paste
Replace
To replace an object with the copy and paste replace options:
1 Select the object you want to copy in the Organizer panel.
2 Right-click on the object and select Copy, or select Edit > Copy from the
main toolbar.
3 Select the object you want to replace.
4 Right-click on the parent object and select Paste Replace, or select Edit
> Paste Replace from the main toolbar.
The configuration wizard for the new copy appears.
5 Make configuration changes to the new object if required, then click
Finish to close the wizard and save the changes. (Generally, you will
need to make some configuration changes in order to make the object
unique. Otherwise, 3WXM cannot complete the paste operation.)
After you click Finish to close the configuration wizard, the new object
appears.
For example, to copy a RADIUS server from one WX switch to another:
1 Expand the view of a Mobility Domain in the Organizer panel to display
the WX switches in the Mobility Domain.
2 Select the switch you want to copy, then right-click on the switch and
select Copy.
3 Select the Mobility Domain where you want the copy to appear, then
right-click and select Paste Replace.
The Modify WX switch wizard appears.
4 Edit the switch name and other parameters as needed. (For example, you
will need to modify the switch name as well as its IP interfaces and system
IP address.) Then click Finish to close the wizard and complete the copy.
The new switch appears under the Mobility Domain.