CLI Reference Guide

Alerts Panel 51
Table 12 lists the types of alerts displayed in the Alerts panel.
Table 12 Alerts
Alert Category Description
Configuration Lists the number of configuration errors and warnings
encountered when 3WXM verifies WX switch
configurations in the network plan.
3WXM compares a switch’s configuration to a set of
configuration rules, and flags the items that must (error) or
should (warning) be corrected before deploying the switch
configuration from the network plan to the live network.
Select this alert to open the Config Verification tab of the
Verification tab in the Content panel. You can use this tab
to correct configuration errors or disable rules.
Network Lists the number of configuration differences between all
WX switches in the network and their counterparts in the
network plan.
Select this alert to open the Network Verification tab of
the Verification tab in the Content panel. You can use this
tab to edit configuration items or disable rules.
Rogue Detection Lists the total number of rogues detected by 3Com radios
and still operating in the Mobility Domain(s) defined in the
network plan.
Select this alert to open the Rogue Detection tab in the
Control panel. You can use this tab to list information
about non-3Com wireless devices detected in the
network.
Local Changes Lists the number of WX switch configuration changes that
have occurred in 3WXM (in the network plan) since the
last time the switches in the network were synchronized
with their counterparts in 3WXM.
Select this alert to open the Managed Devices tab in the
Content panel. You can use this tab to review the local
changes and deploy them to the network.
Network Changes Lists the number of WX switch configuration changes that
have occurred in the live network since the last time the
switches in the network were synchronized with their
counterparts in 3WXM.
Select this alert to open the Managed Devices tab in the
Content panel. You can use this tab to review the network
changes and upload them to 3WXM.