CLI Reference Guide

Organizer Panel 49
Table 10 lists the object that can appear under Third Party APs.
Site Objects The Sites section of the Organizer panel contains objects for the buildings
where you want to deploy 3Com equipment. A site can contain one or
more buildings and each building can contain one or more floors. Each
floor contains objects for wiring closets, coverage areas, MAP access
points, and third-party access points.
Table 11 lists the objects in a site.
IP Services Settings for IP parameters:
 IP routes to the default gateway
 IP aliases
 Domain Name Service (DNS) settings
 Network Time Protocol (NTP) settings
Address Resolution Protocol (ARP) settings
Table 10 Third Party AP Objects
Object Description
AP: name Configuration parameters for a third-party (non-3Com) AP.
3WXM takes these third-party access points into consideration
when calculating MAP access point placement, channel settings,
and power settings. In addition, WX switches do not issue
countermeasures against these access points
Table 9 WX Switch Objects (continued)
Table 11 Third Party AP Objects
Object Description
Building Building in the selected site.
Floor Floor in the selected building.
Wiring Closet Wiring closet (switching closet) on the selected floor. During
planning for 3Com equipment placement, 3WXM places WX
switches in the wiring closets.