CLI Reference Guide

Changing WX Connection Settings 487
If this is the first user account, 3WXM Services inserts the username you
used to log onto the machine that is running 3WXM Services in the
Account Name box. However, you are not required to use this name. In
fact, you are not required to use a name that matches a user account on
the machine.
The 3WXM Services automatically makes the first user account you add
an Admin account.
 Add Provision Account — Users with provision role can change
the list of WX switches monitored by the service.
 Add Monitor Account — Users with the monitor role can enable
3WXM to access the service but cannot change any service
preferences.
b Enter a username. The name does not need to match a user account
configured on the machine.
c Enter the password you want the user to use when logging on to the
monitoring service.
d Reenter the password.
The user appears in the Authorized Users list.
11 Add other users if needed, then click Save to save the changes or Cancel
to cancel the changes.
12 Click another tab to configure more settings or click Close to close the
3WXM Services Setup dialog box.
Changing WX
Connection
Settings
The WX connection settings control the timeout and retries for
connections with monitored WX switches, and the types of certificates
the service will accept from the WX switches.
1 Select Tools > 3WXM Services Setup. The 3WXM Services Setup dialog
box appears. (See Figure on page 480.)
2 Click the WXs Connection Settings tab.
3 To change the number of seconds 3WXM Services waits for a TCP
connection with a WX switch to reach the Connect stage, type or select
the value in the Connect Timeout box. You can specify from 1 to 30
seconds. The default is 15 seconds.