CLI Reference Guide

46 CHAPTER 2: WORKING WITH THE 3WXM USER INTERFACE
Equipment Objects The Equipment section of the Organizer panel contains configuration
objects for Mobility Domains, WX switches, and third-party APs. At the
top level of the hierarchy, the Equipment section of the Organizer panel
can contain the following types of objects:
An example Equipment section is shown below. The example shows a
network plan with a Mobility Domain called 3ComAir. The 3ComAir
Mobility Domain contains five WX switch objects.
Individual WX switches can be added to a Mobility Domain by 3WXM as
part of network planning. You also can add a switch running in the live
network by uploading it into 3WXM, or you can create a new switch with
the WX Switch wizard.
WX switches do not need to be configured under a Mobility Domain. The
example shows objects for two WX switches, WX1200-bottom and
WX1200-top, that do not belong to the 3ComAir Mobility Domain. The
example also shows an object for third-party APs.
Mobility Domain—Configuration parameters for a Mobility Domain.
You can configure parameters for the WX switches within a Mobility
Domain.
WX switches—Configuration parameters for WX switches not in a
Mobility Domain.
Third-Party APs—Configuration parameters for third-party
(non-3Com) APs.