CLI Reference Guide

Importing RF Measurements 457
4 Select the source(s) of the measurements.
 Network—Measurements come from MAP radios.
 File—Measurements come from a site survey file.
You can select one or both sources.
5 If you selected File, select the file format from the File Format listbox.
6 If you did not select File, go to step 9.
7 Click Choose to navigate to the csv file that contains the RF
measurement data.
8 In the Map Name field, specify the map name.
The map name must match the name used in the site survey tool.
9 Click Next.
The import progress is displayed. When the import is done, check the
Total valid RF measurements found line in the progress messages.