CLI Reference Guide

Generating a Radio Details Report 449
 7 Days
 30 Days
5 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
6 To prevent 3WXM from replacing an existing report of the same type
with this new report, click next to Overwrite Existing Files to deselect
this option.
7 Click Generate.
8 When the report is generated, click the report link to view it.
The RF summary report contains the following sections:
 Cumulative data for the scope of the report
 Detailed data for each WX switch within the scope of the report
Generating a Radio
Details Report
The radio details report lists details about an individual radio.
The data for this report comes from the 3WXM Services. The Enable RF
trending option, located in the RF Monitor group box of the Monitoring
Settings tab, must be enabled. (See “Changing Monitoring Settings” on
page 489.)
1 Select Reports > Radio Details from the toolbar in the main 3WXM
window.
The Radio Details Report dialog box appears.
2 Select the radio for which you want the report.
The scope is always MAP Radio and cannot be changed.
3 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
4 To prevent 3WXM from replacing an existing report of the same type
with this new report, click next to Overwrite Existing Files to deselect
this option.
5 Click Generate.
6 When the report is generated, click the report link to view it.