CLI Reference Guide

448 CHAPTER 12: GENERATING REPORTS
5 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
6 To prevent 3WXM from replacing an existing report of the same type
with this new report, click next to Overwrite Existing Files to deselect
this option.
7 Click Generate.
8 When the report is generated, click the report link to view it.
The network usage report contains the following sections:
 Cumulative statistics for the scope of the report
 Usage statistics on individual WX switches
Generating an RF
Summary Report
The RF summary report lists summary RF statistics.
The data for this report comes from the monitoring service. The Enable
RF trending option, located in the RF Monitor group box of the
Monitoring Settings tab, must be enabled. (See “Changing Monitoring
Settings” on page 489.)
1 Select Reports > RF Summary from the toolbar in the main 3WXM
window.
The RF Summary Report dialog box appears.
2 Select the scope type of the report from the Report Scope Type
drop-down list:
 Mobility Domain
 Wireless Switch
 Site
 Building
 Floor
 Coverage Area
3 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
4 Select the time period for the report:
 1 Hour
 24 Hours