CLI Reference Guide

Generating a Network Usage Report 447
The watch list client report contains the following sections:
 Session Properties
 Location History
 Session Statistics
 AP Statistics
(See “Using the Client Monitor Window” on page 367 for information
about the data columns in each section of the report.)
Generating a
Network Usage
Report
The network usage report lists network usage statistics.
The data for this report comes from the monitoring service. The Enable
RF trending option, located in the RF Monitor group box of the
Monitoring Settings tab, must be enabled. (See “Changing Monitoring
Settings” on page 489.)
1 Select Reports > Network Usage from the toolbar in the main 3WXM
window.
The Network Usage Report dialog box appears.
2 Select the scope type of the report from the Report Scope Type
drop-down list:
 Mobility Domain
 Wireless Switch
 Site
 Building
 Floor
 Coverage Area
3 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
4 Select the time period for the report:
 1 Hour
 24 Hours
 7 Days
 30 Days