CLI Reference Guide

Generating a Client Errors Report 445
Generating a Client
Errors Report
The client errors report lists error statistics for current client sessions.
The data for this report comes from the 3WXM Services. The Enable RF
trending option, located in the RF Monitor group box, must be enabled.
(See “Changing Monitoring Settings” on page 489.)
1 Select Reports > Client Errors from the toolbar in the main 3WXM
window.
The Client Errors Report dialog box appears.
2 Select the scope type of the report from the Report Scope Type
drop-down list:
 Mobility Domain
 Wireless Switch
 Site
 Building
 Floor
 Coverage Area
3 Select the instance for which you want the report. For example, if the
scope is Building, select the building.
4 Select the time period for the report:
 1 Hour
 24 Hours
 7 Days
 30 Days
5 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
6 To prevent 3WXM from replacing an existing report of the same type
with this new report, click next to Overwrite Existing Files to deselect
this option.
7 Click Generate.
8 When the report is generated, click the report link to view it.
The client errors report contains the following sections:
 Cumulative errors for the scope of the report