CLI Reference Guide

Generating a Client Details Report 443
5 To prevent 3WXM from replacing an existing report of the same type
with this new report, click next to Overwrite Existing Files to deselect
this option.
6 Click Generate.
7 When the report is generated, click the report link to view it.
The client summary report contains the following sections:
 Total Num Sessions
 Average SNR
 Average RSSI
 Session Summary
 Client Sessions
 SSID Summary
 Access Type Summary
 Top Bandwidth Sessions
 Low RSSI Sessions
 Low SNR Sessions
(See “Using the Client Monitor Window” on page 367 for information
about the data columns in each section of the report.)
Generating a Client
Details Report
The client details report lists details about current client sessions.
The data for this report comes from the monitoring service. The Enable
client session collection option, located in the Client Monitor group
box of the Monitoring Settings tab, must be enabled. (See “Changing
Monitoring Settings” on page 489.)
1 Select Reports > Client Details from the toolbar in the main 3WXM
window.
The Client Details Report dialog box appears.
2 Click Add to add a report filter. The filter configuration fields are
activated.