CLI Reference Guide

Generating a WX Configuration Report 441
Generating a WX
Configuration
Report
The WX configuration report lists configuration details for a WX switch.
1 Select Reports > WX Configuration from the toolbar in the main
3WXM window.
The WX Configuration Report dialog box appears.
2 Select the WX switch for which you want the report.
The scope is always Wireless Switch and cannot be changed.
3 To change the output directory for the report, click on the button next to
output directory, navigate to the new directory, and click Select.
4 To prevent 3WXM from replacing an existing report of the same type
with this new report, click next to Overwrite Existing Files to deselect
this option.
5 Click Generate.
6 When the report is generated, click the report link to view it.
Table 65 lists the sections in the report.
Table 65 WX Configuration Report Sections
Section Description
System Info Name, system IP address, software, states of the
management services, and states of active RF scanning
and countermeasures.
Mobility Domain System IP address of the seed for the Mobility Domain the
WX switch is in.
10/100 Ports 10/100 Ethernet port settings configured on the WX
switch.
Gig Ports Gigabit port settings (if applicable configured on the WX
switch.
VLANs VLANs configured on the WX switch.
Spanning Tree STP settings configured on the WX switch.
IP Properties IP settings, including routes and DNS parameters,
configured on the WX switch.
ACLs Access Control Lists (ACLs) configured on the WX switch.
APs Directly connected MAPs configured on the WX switch.