CLI Reference Guide

430 CHAPTER 11: DETECTING AND COMBATTING ROGUE DEVICES
Clients Tab
The Clients tab lists details about the clients of rogue devices. To display
client information for a rogue, select the rogue in the Filtered List.
Table 59 lists the information displayed on the Clients tab.
Location Tab
The location tab displays the likely physical location of the rogue. (See
“Displaying a Rogue’s Geographical Location”.)
Displaying a
Rogue’s
Geographical
Location
If building and floor information for the site is modeled in the network
plan, you can display the likely physical location of a rogue. 3WXM
displays the floor plan for the floor where the rogue is believed to be
located, and displays the areas where the rogue is probably located.
This option displays the likely location of the rogue when the data was
collected by the monitoring service from the Mobility Domain’s seed WX
switch. If the rogue has moved since then, the location information will
not be current.
To display the location of a rogue within a site
1 Select the rogue in the rogue list.
2 Click on the toolbar. The Location tab appears, next to the details tab.
The likely location of the rogue is indicated by color. The legend beneath
the floor view indicates the likelihood represented by each color.
RSSI Strength of the signal received by the listener from the
rogue.
SSID SSID of the rogue.
Table 62 Client Columns
Column Description
Client MAC address of the client.
Vendor Manufacturer of the client.
Channel Channel the client is on.
SSID SSID the client is associated with.
Table 61 Rogue Listener Details Columns
Column Description