CLI Reference Guide

428 CHAPTER 11: DETECTING AND COMBATTING ROGUE DEVICES
To change the scope of the rogue list
1 Select the scope in the Organizer panel.
2 Select Show for selected scope in the toolbar of the Rogue Detection
tab.
3WXM updates the rogue list to display only the rogues detected within
the selected scope.
If you change the scope by selecting another object in the Organizer
panel, or you deselect the Show for selected scope option, click
Refresh to refresh the rogue list for the new scope setting.
Displaying Rogue
Details
To display details for a rogue, select the rogue in the rogue list. Details
are displayed in the tabs in the right portion of the Rogue Detection tab.
Current, Current Hour, Current Day, and History Tabs
The Current, Current Hour, Current Day, and History tabs show rogues
detected in the past.
 Current — Lists the rogues observed during the most-recent polling
intervals.
 Current Hour — Lists the rogues observed during the most-recent
hour.
 Current Day — Lists the rogues observed during the most-recent
day.
 History — Lists the rogues observed during the most-recent 30-day
period.
Each rogue is listed only once, even if multiple entries for the rogue
appear in the Activity Log tab. For example, if a rogue is detected during
three polling intervals, separate entries for each polling interval appear in
the Activity Log. However, at the end of the hour, when the activity data
is consolidated and moved to the Current Hour tab, only one entry
appears on that tab for the rogue.
On each tab, the Polled Results column lists the time when the data was
received from the monitoring service.