CLI Reference Guide

Using the Rogue Detection Tab 427
2 Select the type of entries you want to display:
 Rogue APs—APs that are on the 3Com network but do not belong
there.
 Interfering APs—Devices that are not part of the 3Com network but
also are not rogues. No client connected to these devices have been
detected communicating with any network entity listed in the
forwarding database (FDB) of any WX switch in the Mobility Domain.
Although interfering devices are not connected to your network, they
might be causing RF interference with MAP radios.
 Ad-hoc clients—Wireless clients who are configured to communicate
wirelessly outside of the network infrastructure. Ad-hoc clients are not
necessarily malicious, but they do steal bandwidth from your
infrastructure users.
Ad-hoc clients are further categorized into rogues and interfering
devices. The word Rogue or Interfering appears in parentheses next to
the word Ad-hoc.
By default, all these entry types are displayed.
3 Select the period by which you want to filter the list from the Filter By
listbox:
 Current—Lists the rogues detected during the most-recent polling
interval. Go to step 5.
 Current Hour—Lists the rogues detected during the most-recent hour.
Go to step 5.
 Current Day—Lists the rogues detected during the most-recent day.
Go to step 5.
 History—Lists the rogues detected during a specific date range. Go to
step 4.
4 To change the start and end dates for the History interval, edit the values
in the boxes or click on the down arrows next to From and To to display
calendars and select the dates.
5 Click Apply. 3WXM replaces the rogue list with the set of rogues
detected during the period you selected.