CLI Reference Guide

42 CHAPTER 2: WORKING WITH THE 3WXM USER INTERFACE
To display the objects in a section of the Organizer panel, click on the
right arrow next to the section name. For example, to display the
objects in the Sites section, click next to Sites. The section is
expanded to display the site names.
To expand the view of an object in the Policies, Equipment, or Sites panel
and display its contents, click on the plus sign next to the object. For
example, to display the buildings in a site, click on the plus sign next to
the site name. To display the floors in the building, click next to the
building name, and so on.
Details Checkbox In the Equipment and Sites sections, the Details checkbox controls the
level of detail displayed. When Details is enabled, all objects in the
Mobility Domain or site can be displayed. When Details is disabled, the
display is restricted to objects for which you can display data in the
Monitor tab of the Content panel.
 Mobility Domains — The display is restricted to switches and their
port connections, including connections to MAP access points. Rogue
Detection objects are not displayed. The only objects listed under the
WX switches are for physical port connections and Distributed MAP
connections.
 Sites — The display is restricted to coverage areas. Objects for
individual access points are not displayed, although you can expand a
coverage area to list the individual 3Com radios in the coverage area.
However, regardless of whether Details is enabled, you can drill down to
display details at the most granular level if needed.