CLI Reference Guide

Using the RF Monitor Window 397
Table 53 lists the information displayed on the tab.
Displaying the
SSID-to-BSSID
Mapping
To display the SSIDs configured on a radio and their BSSIDs, in the RF
Monitor window, select the SSID-BSSID Mapping tab at the bottom of
the window.
Table 53 RF Monitor RF Neighborhood Columns
Column Description
Neighbor MAP name and radio number.
Note — This information comes from the site plan and is
displayed only if the MAP is in the plan.
BSSID BSSID detected by the radio.
Note — This column displays a single entry for each 3Com
radio, even if the radio is supporting multiple BSSIDs.
However, BSSIDs for third-party 802.11 radios are listed
separately, even if a radio is supporting more than one
BSSID.
Channel Channel on which the BSSID is detected.
RSSI Received signal strength indication (RSSI), in decibels
referred to 1 milliwatt (dBm). A higher value indicates a
stronger signal.