CLI Reference Guide

384 CHAPTER 10: MONITORING THE NETWORK
Authentication Server System IP address of the WX switch that was attempting
to authenticate the client.
Note — The system IP address is listed even if the switch
was using a RADIUS server to authenticate the client.
SSID SSID with which the client is associated.
Access Type Authentication type that granted access:
 DOT1X
 MAC
 LAST-RESORT
 WEB
EAP Type Extensible Authentication Protocol (EAP) used for
authentication:
 PEAP — Protected Extensible Authentication Protocol
 MD5 — Message-digest algorithm 5
 TLS — Transport Layer Security protocol
 Pass-Through — The switch established an EAP
session directly between the client and the RADIUS
server. All authentication information and certificate
exchanges between the client and RADIUS server
passed through the switch.
 None — EAP was not used to authenticate this client.
None is the EAP type when MAC authentication,
last-resort authentication, or WebAAA is used to
authenticate the client.
Table 49 Session Properties Columns (continued)
Column Description