CLI Reference Guide

378 CHAPTER 10: MONITORING THE NETWORK
Session ID ID used by 3Com equipment to track the session within
the Mobility Domain.
Client IP Address IP address of the client.
Auth Server IP System IP address of the WX switch that was attempting
to authenticate the client.
Note — The system IP address is listed even if the switch
was using a RADIUS server to authenticate the client.
SSID SSID the client was associated with.
Table 44 Activity Details for Dot1x Failure
Column Description
User Name Username of the client.
Auth Protocol Type 802.1X protocol used to authenticate the client:
 EAP-TLS
 MD5
 NONE
 PASS-THROUGH
 PEAP
Client Location Mobility Domain, WX switch, MAP access point, and radio
that were dealing with the client.
Dot1x State 802.1X state of the client:
 administrative-kill
 bad-rsnie
 bonded-auth-failure
 fourway-hs-failure
 max-sessions-exceeded
 other
 quiet-period
 timeout
 user-glob-mismatch
MAC Address MAC address of the client.
SSID SSID the client was requesting.
Table 43 Activity Details for Disassociation (continued)
Column Description