CLI Reference Guide

Using the Client Monitor Window 377
Auth Server IP System IP address of the WX switch that was attempting to
authenticate the client.
Note — The system IP address is listed even if the switch was
using a RADIUS server to authenticate the client.
SSID SSID the client was requesting.
Client Location Mobility Domain, WX switch, MAP access point, and radio
that were dealing with the client.
Table 42 Activity Details for Client Cleared
Column Description
User Name Username of the client.
MAC Address MAC address of the client.
SSID SSID the client was associated with.
Session ID ID used by 3Com equipment to track the session within
the Mobility Domain.
Client IP Address IP address of the client.
Client Location Mobility Domain, WX switch, MAP access point, and radio
that were dealing with the client.
Table 43 Activity Details for Disassociation
Column Description
User Name Username of the client.
MAC Address MAC address of the client.
Client VLAN Name VLAN to which the client was assigned.
Auth Protocol Type 802.1X protocol used to authenticate the client:
 EAP-TLS
 MD5
 NONE
 PASS-THROUGH
 PEAP
 N/A
Client Location Mobility Domain, WX switch, MAP access point, and radio
that were dealing with the client.
Table 41 Activity Details for Authorization Successful (continued)
Column Description