CLI Reference Guide

376 CHAPTER 10: MONITORING THE NETWORK
Auth Protocol Type 802.1X protocol used to authenticate the client:
 EAP-TLS
 MD5
 NONE
 PASS-THROUGH
 PEAP
RSSI Strength of the signal received by the radio from the client.
Access Type Authentication type that granted access:
 DOT1X
 MAC
 LAST-RESORT
 WEB
Session ID ID used by 3Com equipment to track the session within the
Mobility Domain.
Client IP Address IP address of the client.
Session State State of the user session:
 Associated — User is authenticated using an 802.11
protocol and associated with a MAP.
 Authorizing — User is authenticated and is starting the
AAA authorization process.
 Authorized — User is authorized.
 Active — User is on the network.
 Deassociated — User is disassociated from the MAP.
 Roaming_away — User is roaming (a connection in the
new location is established).
 Updated_to_roam — User is roaming. Session statistics
have been collected and will be transmitted to the new
location.
 Web_authing — User is being authenticated by
WebAAA.
 Wired — User is being authenticated using an 802.11
protocol on a wired authentication port.
 Clearing — User session is being terminated.
 Invalid — Usually indicates the session is being
terminated, and session information is no longer available.
Table 41 Activity Details for Authorization Successful (continued)
Column Description