CLI Reference Guide

368 CHAPTER 10: MONITORING THE NETWORK
Refreshing Client
Data
By default, the data displayed in the Client Monitor window is not
refreshed. You can refresh the data on demand, or automatically at
regular intervals. If you enable automatic data refresh, the data is
refreshed based on the client monitor polling interval specified. (See
“Changing Monitoring Settings” on page 489.)
To refresh the data on demand
To refresh the data on demand, click the Refresh option on the Client
Monitor window’s toolbar.
To refresh the data automatically
1 Click the checkbox next to Auto Refresh on the Client Monitor window’s
toolbar to enable the option.
2 Click Refresh.
Displaying Client
Activity Information
The Client Activity tab displays current statistics for client activity on the
network. The data fields in the display depend on the scope:
 If a Mobility Domain is selected, a row of data is displayed for each
WX switch in the Mobility Domain.
 If a site is selected, a row of data is displayed for each building in the
Site.
 If a building within a Site is selected, a row of data is displayed for
each floor in the building.
 If a floor is selected, a row of data is displayed for each coverage area
within the floor
 If a WX switch, MAP access point, or radio is selected, SNMP traps
reported to the 3WXM service for that device are displayed.
Report Opens the Watch List Client Report dialog box, which
enables you to generate a report for specific clients on the
watch list. (See “Generating a Watch List Client Report”
on page 446.)
Table 35 Toolbar Options in Client Monitor Window (continued)
Option Description