CLI Reference Guide

366 CHAPTER 10: MONITORING THE NETWORK
You can change the RSSI options even after measurement data is
displayed. The data is immediately updated. To take a new measurement,
click on the new measurement point. The measurement data is
immediately updated for the new measurement point.
Using the Status
Summary Window
The Status Summary window shows the operational status of 3Com
equipment (WX switches, their MAP access points, and MAP radios). The
Status column shows the equipment status, using the same colors as the
Explore window. Additional information is displayed for each equipment type.
Double-click on a row in the Status Summary window to display more
information about the object.
Show MAPs on Other
Floors
Show the MAPs located on other floors that can be
detected from this RF measurement point.
MAP/AP MAP or third-party access points detected.
Distance (Feet) Distance between MAP and RF measurement point.
Channel Channel of the MAP or third-party access point.
RSSI (dBm) Signal strength from the MAP at the RF measurement
point.
Status Whether the MAP or third-party is active (OK) or disabled.
Table 34 RF Measurement Information (continued)
Item Value