CLI Reference Guide

Configuring and Applying Policies 347
9 Click Next. The Policy Member Selection page appears.
10 In Available Devices column, select the switches to which you want to
apply the policy, then click Add to move the switches to the Current
Devices column.
Moving a switch to the Current Devices column automatically applies the
policy settings that were in the policy when you first associated it with a
switch. However, if you have made changes to the policy subsequent to
associating it with a switch, the changes are not automatically applied. To
apply the changes, click Finish to save the policy, then select Manage >
Policy Manager from the menu bar and go to “Reviewing and Applying
Policy Settings”.
11 Click Finish to save the policy and close the wizard. Go to “Reviewing
and Applying Policy Settings”.
Reviewing and
Applying Policy
Settings
1 If you have not already done so, use the procedure in ““Configuring a
Policy” on page 346 to configure a policy and select the switches to
which you want to apply the policy.
2 Select Manage > Policy Manager from the toolbar in the main 3WXM
window.
Admin and Network Access
Rules
“Configuring and Managing Access Rules for
Administrative Users” on page 280
“Configuring and Managing Access Rules for
Network Users” on page 286
RF Detection “Detecting and Combatting Rogue Devices” on
page 419
VLANs and Spanning Tree
Properties
“Configuring VLANs” on page 189
Service Profiles and Radio
Profiles
“Configuring a Service Profile” on page 238.
“Configuring a Radio Profile” on page 245
Mobility Profiles “Configuring Mobility Profiles” on page 306
Local User Database “Creating and Managing Users in the Local User
Database” on page 269
Location Policy “Configuring Location Policies” on page 299
Table 30 Configuration Information
For This Feature Area See...