CLI Reference Guide

346 CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS
Configuring a Policy
1 In the Organizer panel, click Policies to expand the Policies area, if not
already expanded.
2 Do one of the following:
 Click in the blank area of the Policies area and select Config > Insert
> Policy.
 Right-click in the blank area of the Policies area and select Insert >
Policy.
The Create Policy wizard appears.
3 Type a name for the policy.
4 Select a switch model or select any to make the policy applicable to any
model switch.
The following policy feature areas can be configured only if you select a
specific switch model: ACLs, VLANs and Spanning Tree Properties,
Mobility Profiles, and Location Policy.
5 Select the MSS version or select any.
6 Click Next. The Policy Data Setup page appears.
7 Select the feature areas you want to set in the policy.
When you apply the policy to a switch, all parameter settings from all the
feature areas you select are applied to the switch. This includes any
settings you leave at their default settings in the policy.
8 For each feature area you select, click the button to display the
configuration wizard for that feature area’s settings.
For configuration information, see the following:
Table 30 Configuration Information
For This Feature Area See...
Management Services “Configuring WX Management Services” on
page 204
ACLs “Using Access Control Lists for Security” on
page 307
IP Services “Configuring IP Services” on page 226
RADIUS “Connecting to RADIUS Servers and Server Groups”
on page 264