CLI Reference Guide

Deploying WX switches from a Network Plan to the Network 339
Deploying WX
switches from a
Network Plan to
the Network
To deploy the WX switches configured in a network plan, select
Manage > Deploy from the toolbar in the main 3WXM window. The
Deploy Configurations dialog box is displayed.
This dialog box is also accessible from the Managed Devices tab, and is
displayed when you click Deploy on that tab.
To deploy network
plan changes to the
network
To deploy network plan changes to the network, use the following
procedure.
1 Select one or more WX switches.
To select multiple WX switches, press Shift (for contiguous WX switches)
or Control (for noncontiguous WX switches) while clicking.
2 In the Local Changes group box, click Deploy. The Deploy
Configurations dialog box appears.
The dialog lists the WX switches that have configuration changes.
To deploy WX
switches from a
network plan to the
network
To deploy WX switches from a network plan to the network, use the
following procedure.
1 Select the WX switches to which you want to deploy the changes.
To select more than one WX, click Shift while clicking to select
contiguous items, or click Ctrl while clicking to select noncontiguous
items.
2 Click Deploy Now.
The deployment status for each affected WX is shown on the History tab
at the bottom of the dialog box.
If errors occur, click Selected Errors to view the errors. If there are errors,
fix them and verify the changes before trying to deploy again. (You can
use the Verification tab to fix the errors. See “Verifying Configuration
Information” on page 327.)
If the deploy is successful, 3WXM also instructs the WX switch to save the
changes in its configuration file.
3 Click Close to return to the Managed Devices tab.