CLI Reference Guide
338 CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS
To modify configuration polling options
1 Display the Managed Devices tab by doing one of the following:
î‚„ Click on Local Changes or Network Changes in the Alerts panel.
î‚„ Select Manage > Managed Devices from the main 3WXM toolbar.
2 Click Options on the Managed Devices tab’s toolbar. The Managed
Device Options dialog box appears.
3 To enable the detection of configuration changes in the network, make
sure Poll Config is selected.
To disable automatic detection, clear Poll Config. By default, this option
is enabled.
4 To specify how often network checks occur, specify the interval between
checks, from 1 to 1440 minutes (24 hours), in the Interval box. The
default is 15 minutes.
5 To be notified of network changes by a popup message, select Prompt
when network changes are detected.
To disable the popup message, deselect the option.
Disabling the popup message does not affect the Network Changes
information in the Alerts panel. The Alerts panel still notifies you of
network changes.
6 To instruct WX switches to save deployed configuration changes in their
configuration files, select Save WX Configuration on Deploy.
To disable saving deployed changes, deselect the option. By default, this
option is enabled.
7 Click Close to save the changes and close the dialog box.