CLI Reference Guide

Synchronizing Local and Network Changes 335
Managing WX switch
Configuration
Changes
You can review WX switch configuration changes, deploy local changes,
and accept or undo changes.
To review changes
1 Display the Managed Devices tab by doing one of the following:
 Click on Local Changes or Network Changes in the Alerts panel.
 Select Manage > Managed Devices from the main 3WXM toolbar.
2 To review changes:
a Select one or more WX switches.
To select multiple WX switches, press Shift (for contiguous WX
switches) or Control (for noncontiguous WX switches) while clicking.
b Click Review in the Local Changes group box to review local changes,
or in the Network Changes group box to review network changes.
c The Review Local Changes or Review Network Changes dialog box
appears, depending on whether you clicked Review for local changes
or network changes.
d Click on a WX switch listed on the left side of the dialog box to display
the configuration changes. The CLI commands for the changes are
shown.
Changes for each WX switch are displayed on separate tabs.
3 To print the changes, click Print.
4 Click Close to return to the Managed Devices tab.
5 Do one of the following:
Upload Opens the Upload Wireless Switch wizard, which lets you
add a new WX switch to the network plan by copying the
configuration from a WX switch already running in the
network.
(See “Uploading a WX Switch Configuration into 3WXM”
on page 325.)
Options Opens the Managed Devices Options dialog box, which
lets you modify parameters used to poll WX switches for
configuration changes.
(See “Modifying Configuration Change Polling Options”
on page 337.)
Table 29 Toolbar Options on Managed Devices Tab (continued)
Option Description