CLI Reference Guide

Synchronizing Local and Network Changes 333
b Click next to the instances you want to disable, then go to step 10.
10 Click Close.
Synchronizing Local
and Network
Changes
Whenever configuration changes occur to a WX switch, 3WXM alerts you
that changes have occurred. If configuration changes occur on a WX
switch in the network or in the network plan so that the network and
network plan are out of synch, 3WXM displays a message in a popup
window to alert you that a change has occurred.
WX switch configuration changes also are indicated in the Alerts panel.
 Local Changes Available indicates that configuration changes have
occurred in the network plan.
 Network Changes Available indicates that configuration changes have
occurred in the live network.
Click on either of these to display the Managed Devices tab. The
Managed Devices tab appears in the Content panel.
You also can display the Managed Devices tab by selecting Manage >
Managed Devices from the main 3WXM toolbar.
The Managed Devices tab enables you to review changes and
synchronize the WX switches in the network with their counterparts in
3WXM by either copying the changes to the other WX switch, or
removing the changes from the WX switch that was changed.
A row of information is displayed for each WX switch. The Local Status
and Network Status columns indicate where changes have occurred.
If you make a configuration change on a WX switch in the network, then
reverse that change, 3WXM still alerts you that changes have occurred.
Change Management
Options
The Managed Devices tab has the following change management
options:
 For local changes (changes in the network plan):
 Review — Display the configuration changes that have occurred
in 3WXM for the selected WX switch. Changes are displayed in CLI
command form.