CLI Reference Guide

328 CHAPTER 8: MANAGING WX SYSTEM IMAGES AND CONFIGURATIONS
The Verification tab contains a Config Verification tab and a Network
Verification tab:
 The Config Verification tab shows errors and warnings for WX switch
configuration information in 3WXM.
 The Network Verification tab shows errors and warnings for
configuration information in the network. The errors and warnings
can be for WX switch configuration items and for the monitoring
service.
On each tab, the Message column lists error descriptions in red and lists
warning descriptions in orange:
 Errors are serious problems that must be addressed before
deployment. By default, you cannot deploy a network plan with errors
in it. After fixing errors, verify the network plan again to ensure that
the errors have been resolved.
 Warnings are noncritical issues that do not stop deployment. Review
any warnings and consider resolving the issues before deployment.
Details about the selected error or warning appear in the lower left
section of the tab.
The Resolution section of the tab lists options for resolving the warning or
error.
Toolbar Options Table 28 lists the options on the Event tab’s toolbar.
Table 28 Toolbar Options on Verification Tab
Option Description
Refresh Refreshes the data.
Options Displays the Verification Options dialog box, which enables
you to change verification options and disable or reenable
rules. (See “Changing Verification Options” on page 330.)