CLI Reference Guide

318 CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS
6 In the Name list, select the VLAN name from the list.
Only names of VLANs that have previously been created appear in the list.
7 Click Finish to save the mapping. The Create ACL wizard reappears.
8 Click Finish to close the Create ACL wizard.
Mapping an ACL to a Port
1 In the ACL Map page, click New.
2 Select New ACL Port Map. The Create ACL Port Map dialog box
appears.
3 In the Direction list, select In to filter incoming packets or Out to filter
outgoing packets.
4 In the Port list, select the port or port group to which you want to map
the ACL.
You cannot map an ACL to a MAP port or a wired authentication port.
5 Click Finish to save the mapping. The Create ACL wizard reappears.
6 Click Finish to close the Create ACL wizard.
Mapping an ACL to a Virtual Port
To map an ACL to a virtual port:
1 In the ACL Map Setup page, click New.
2 Select New ACL VPort Map. The Create ACL VPort Map dialog box
appears.
3 In the Direction list, select In to filter incoming packets or Out to filter
outgoing packets.
4 In the Tag Value box, specify the 802.1Q tag value that identifies a virtual
port in a VLAN.
The tag value can be a number from 1 to 4095. The default value is 1.
Make sure that you do not specify duplicate mappings that specify the
same port and tag value.
5 In the port list, select the port to which you want to map the ACL.
You cannot map an ACL to a MAP port or a wired authentication port.
6 Click Finish to save the mapping. The Create ACL wizard reappears.
7 Click Finish to close the Create ACL wizard.