CLI Reference Guide

306 CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS
Configuring
Mobility Profiles
Mobility Profile™ attributes allow or deny access to the network for a
specific user or group of users. When you create a Mobility Profile, you
specify which MAP ports, Distributed MAPs, or wired authentication ports
are to be included. Typically, you include ports that are defined as MAP
ports or Distributed MAPs. You can specify that all or no ports are
included, or you can specify a list of ports to be included.
After creating a Mobility Profile, you can assign it to users created in the
local WX user database, or users who are authenticated and authorized
by a RADIUS server. You assign the name of the Mobility Profile by using
the Mobility-Profile RADIUS attribute, which is a 3Com vendor-specific
attribute (VSA).
To create a Mobility Profile
1 Access the WX Switch wizard for the WX switch. (See “Accessing the WX
Switch Wizard” on page 187.)
2 Select AAA at the top of the wizard, if not already selected.
3 Select Mobility Profile from the organizer list on the left side of the page,
if not already selected.
4 Click New Mobility Profile. The Create Mobility Profile wizard appears.
5 In the Profile Name box, type the name of the Mobility Profile.
The name can be up to 16 alphanumeric characters, and it cannot
contain tabs.
6 In the Ports list, specify ports to include in the Mobility Profile:
 All — Include all MAP or wired authentication ports. Go to step 11.
 Selected — Include a selected list of ports. Go to the next step.
 None — Include no ports. Go to step 11.
7 Click Choose Available and select a port. Repeat for each port.
8 In the Distributed MAPs list, specify the Distributed MAPs to include in
the Mobility Profile:
 All — Include all Distributed MAPs. Go to step 11.
 Selected — Include a selected list of Distributed MAPs. Go to the next
step.
 None — Include no Distributed MAPs. Go to step 11.