CLI Reference Guide

Configuring AAA for Clients of Third-Party APs 305
6 To change the UDP port number on which the WX switch will listen for
RADIUS access-requests from the AP, edit the number in the
Authentication Port box.
7 To change the UDP port number on which the WX switch will listen for
RADIUS stop-accounting records from the AP, edit the number in the
Accounting Port box.
8 Type the key, which is the shared secret configured on the RADIUS
servers. MSS uses the shared secret to authenticate and encrypt RADIUS
communication.
9 Click Finish to close the wizard and save the changes.
To configure a port as a RADIUS proxy for an SSID
1 Access the Modify WX Switch wizard for the switch. (“Accessing the WX
Switch Wizard” on page 187.)
2 Select AAA at the top of the wizard, if not already selected.
3 Select 802.1Q Mapping from the organizer list on the left side of the
page, if not already selected.
4 Click New 802.1Q Mapping. The Create 802.1Q Mappings wizard
appears.
5 In the Physical Port List group box, click Choose Available to select the
list of WX physical ports to which the third-party AP is connected. The
Physical Port Selection dialog box appears.
a Select one or more ports. To make multiple selections, press Shift (for
contiguous items) or Control (for noncontiguous items) while clicking
items.
b Click Close.
6 Edit the value in the Tag box to match the 802.1Q tag value in packets
from the third-party AP. Specify the tag value that the third-party AP will
use for the SSID you plan to select from the SSID drop-down list.
7 Select the SSID from the SSID drop-down list.
8 Click Finish to close the wizard and save the changes.