CLI Reference Guide

Creating and Managing Users in the Local User Database 277
mobility-profile
(network access
mode only)
Mobility Profile
attribute for the user.
A WX switch can
provide network access
for users associated
with a third-party AP
that has authenticated
the users with RADIUS.
You can connect a
third-party AP to a WX
switch and configure
the WX to provide
authorization for
clients who
authenticate and
access the network
through the AP. For
more information, see
“Configuring Mobility
Profiles” on page 306.
Name of an existing Mobility Profile,
which can be up to 32 alphanumeric
characters, with no tabs or spaces.
If the Mobility Profile feature is
enabled, and a user is assigned the
name of a Mobility Profile that does
not exist on the WX Wireless Switch,
the user is denied access.
service-type Type of access the user
is requesting.
Access type, which can be one of the
following numbers:
2—Framed; for network user access
6—Administrative; for administrative
access, with authorization to access
the enabled (configuration) mode. The
user must enter the enable command
to access the enabled mode.
7—NAS-Prompt; for administrative
access to the nonenabled mode only.
In this mode, the enable command is
not available and the user cannot log
in to the enabled mode.
For administrative sessions, the WX
switch will send 7 (NAS-Prompt) unless
the service-type attribute has been
configured for the user.
The RADIUS server can reply with one
of the values listed above.
If the service-type is not set on the
RADIUS server, administrative users
receive NAS-Prompt access, and
network users receive Framed access.
Table 24 Authentication Attributes for Local Users (continued)
Attribute Description Valid Value(s)