CLI Reference Guide

276 CHAPTER 7: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS

filter-id Inbound or outbound

ACL to apply to the

user.

If configured in the WX switch’s local

database, this attribute can be an

access control list (ACL) to filter

outbound or inbound traffic. Use the

following format:

inboundacl.in

outboundacl.out

If you are configuring the attribute on

a RADIUS server, the value field of

filter-id can specify up to two ACLs.

Any of the following are valid:

filter-id = "Profile=acl1"

filter-id = "OutboundACL=acl2"

filter-id = "Profile=acl1

OutboundACL=acl2"

(Each example goes on a single line on

the server.) The format in which to

specify the values depends on the

RADIUS server.

Regardless of whether the attributes

are defined locally or on a RADIUS

server, the ACLs must already be

configured on the WX switch.

(For more information, see “Mapping

User-Based ACLs” on page 316.)

idle-timeout This option is not implemented in the current MSS version.

Table 24 Authentication Attributes for Local Users (continued)

Attribute Description Valid Value(s)