CLI Reference Guide

Creating and Managing Users in the Local User Database 275
Table 24 lists the user attributes and their value ranges. You can specify
these attributes in lowercase when using the CLI.
Table 24 Authentication Attributes for Local Users
Attribute Description Valid Value(s)
encryption-type Type of encryption
required for access by
the client. Clients who
attempt to use an
unauthorized
encryption method are
rejected.
One of the following numbers that
identifies an encryption algorithm:
 1—AES_CCM (Advanced
Encryption Standard using Counter
with CBC-MAC)
 2—Reserved
 4—TKIP (Temporal Key Integrity
Protocol)
 8—WEP_104 (the default)
(Wired-Equivalent Privacy protocol
using 104 bits of key strength)
 16—WEP_40 (Wired-Equivalent
Privacy protocol using 40 bits of key
strength)
 32—NONE (no encryption)
 64—Static WEP
In addition to these values, you can
specify a sum of them for a
combination of allowed encryption
types. For example, to specify
WEP_104 and WEP_40, use 24.
end-date Date and time after
which the user is no
longer allowed to be
on the network.
Date and time, in the following format:
YY/MM/DD-HH:MM
You can use end-date alone or with
start-date. You also can use
start-date, end-date, or both in
conjunction with time-of-day.